Connection and configuration of your Bluetooth speakers might be difficult and time-consuming due to their sensitivity. Sometimes it’s a matter of timing, and other times the connections are simply not working.

Here’s a step-by-step guide to assist you figure out how to connect your Anker Sound core to your other devices.

Prepare Your Device

First and foremost, make sure that the speakers are turned on.

Press and hold the power button on the top of the speakers for roughly a second to turn on the speakers. When it is turned on, a beeping sound will be heard, and a steady white light will be visible.

Even if your speakers have never been paired before, they will be discoverable if a blinking blue light on the top of the speakers indicates that they are discoverable.

You can now connect it to your device from this point on.

Connecting Anker Sound core to Mobile Devices

Android Phone

For Android users, navigate to Settings > Connections and select the appropriate option. When you enable the Bluetooth capability, the grey switch will convert into a blue switch.

Your phone will scan for any Bluetooth devices that are nearby, and those that are found will be displayed on the screen.

Once Sound core 2 appears on the list, click on it to open it. When the devices are successfully linked, you will hear a confirmation sound and see a constant blue light.

iPhone

Select Settings from the drop-down menu and turn on your Bluetooth connection. The phone will immediately begin searching for accessible Bluetooth devices to pair with once it has been turned on. Sound core 2 will appear in the list, and you should select it.

A confirmation sound and a steady blue light indicate that the devices have been successfully connected.

Connecting Anker Sound core to Other Devices

Windows 10 Laptop

Starting with your Windows laptop, use the “Windows + I” shortcut to bring up the Windows Settings, which will guide you through the process. Select Devices from the drop-down menu, and then switch on the Bluetooth on the laptop. After that, select “Add Bluetooth or other device” from the drop-down menu.
Your laptop will begin scanning for any available devices on the network. Wait about 2 to 5 seconds until Soundcore 2 appears on the list, and then select it from the dropdown menu. When the devices are connected, a confirmation sound and a steady blue light will be heard to confirm that they are connected.

Connect It to a MacBook

Connecting to a MacBook is just as simple with Windows as it is with Mac OS X. Go to System Preferences and select Bluetooth from the drop-down menu. When you click “turn Bluetooth on,” your laptop will become discoverable.

The laptop will begin searching for any Bluetooth devices that are currently available. When Sound core 2 appears on the list, click on it to open it. Following that, a constant blue light and a confirmation sound will indicate that the devices have been successfully connected.

Other Features of Anker Sound core Speakers

Now that you have linked your speakers to your smartphone, here are a few fascinating and useful features that you may take use of while listening to music through your speakers.

 

  • It is necessary to hold down the “Power” button for one second in order to turn on and off the speakers. Sound Core will automatically connect to the most recently connected device that is still accessible to connect to.
  • By pressing and holding the “Play” button for one second on a device that has voice control software, you can activate it.
  • You can answer an incoming call by hitting “Play” immediately, and you can reject one by pressing and holding the same button for a few seconds longer.
  • By tapping the ‘Play’ button, you can put a current call on hold and switch between held and active calls at the same time.
    If you wish to transfer the call from the speakerphone to the phone, hold down the “Play” button for one second after pressing it.

Leave a Reply

Your email address will not be published. Required fields are marked *