Do you have a broken headphone connection in your possession? Is your iPad or phone’s earphone plug stuck in the device? Here’s how to replace a faulty headphone jack in your computer.
Are you holding a broken headphone plug and wondering where it will all come to an end? Have you ever removed your headphones from your tablet or smartphone too quickly, only to discover that a small amount was left behind?

Unfortunately, earphone connectors are not designed to withstand frequent and repeated insertion and removal. However, if the headphone jack on your phone, iPad, or MP3 player has been broken off, the socket will not function. You’ll have to take it out first before you can use any replacement headphones with it.

These six procedures should be able to assist you in removing a Broken headphone jack.

How to Remove a Broken Headphone Jack

Unfortunately, the end of a broken headphone jack can become caught in your phone or tablet all too frequently. However, it turns out that these small metal cylinders are weak at the areas where the (typically black) plastic rings emerge along the length of their length. This is true for any wired earbuds, regardless of brand.

Earphone jacks are included.
A broken headphone jack can be tough to remove, but numerous ways have been identified to make the task more manageable.

1. The interior of a Biro
2. Attaching the rest of the connector plug using superglue
3. The end of the thumbtack has been bent
4. Using a toothpick and hot glue
5. A paperclip that has been heated
6. The Grip Stick is a special instrument designed specifically for this purpose.
Ensure that you are holding your device with the earphone socket pointed downwards when removing the damaged component. Gravity is always on our side!

Also, before we go into the specifics of these strategies, it’s important to remember that you’re taking full responsibility for any actions you take. Despite the fact that it is less invasive than mending headphone speakers, a faulty transfer could result in a broken phone or tablet on your hands.

1. Can a Biro Get a Broken Headphone Jack Out?

Fun fact: the tube that runs along the interior of your biro has a diameter that is almost identical to that of an earphone jack. By applying a little force and adjusting the gadget, you can successfully remove the broken connector from your device.

Remove the inner tube of the pen in order to accomplish this. As the name implies, this is the portion that contains ink, and it is almost often removed by removing the nib of the pen.

You should discover that there is no ink at the bottom of the tube, which is the opposite end from where the nib is located. You can use this section of the tube to pry the broken plug out of the tube. All you have to do is insert it firmly into your earphone socket and pull out the broken headphone jack. The fractured section should be grasped by the tube, which should then be pulled out.

If this doesn’t work the first time, you have a few of other choices. The first step is to gently expand the tube with a nail in order to ensure that the plug fits snugly. Alternately, you might quickly heat the end of the tube to soften it before inserting it into the slot. Allow it to rest for a bit before withdrawing.

Do you have an exceptionally steady hand? Before inserting the tube, apply a little amount of hot glue or superglue to the end of the tube to seal it. A similar strategy is seen in the video above, which makes use of chewing gum.

Finally, it’s possible that you’re lacking in pressure. If possible, cut a two-inch section of the tube (or use something comparable in size, such as the tube from a can of lubricating oil) and insert it into the earphone socket as shown. Following that, tap the lost part into place with anything firm (such as a shoe or slipper) to ensure that it is gripped. Remove the phone from the phone when you are satisfied that it is being held by the tube.

2. Superglue the Other End of the Plug

Alternatively, if the pen cartridge does not function properly or you prefer an alternative way, superglue may be the solution. You are probably aware that while using superglue, it is never possible to bond two surfaces immediately after the glue has been applied.

Instead, you must wait until they have dried slightly and become tacky before moving forward. In this instance, the tackiness is critical to successfully remove the fractured piece.

Insert the remaining end of the earphone plug into a cocktail stick or other narrow applicator and dab a small dollop of superglue on it using a narrow applicator. That’s the portion of the phone that didn’t break off during the call! Wait for it to get sticky (as directed by the packet instructions) before sliding it into the socket. After about 30 seconds of pushing down, begin pulling. If the broken headphone jack is still connected, the problem has been resolved.

It’s critical to use only modest amounts of glue when gluing things together. Aside from that, remaining glue may cause complications in the future. Simply put a small amount of rubbing alcohol to a Q-tip and quickly clean the interior of the socket to resolve the issue.

3. Remove a Broken Headphone Jack With a Thumbtack

If you prefer a more straightforward solution, a bent thumbtack or drawing pin can be utilized. Take a regular tack and hammer the point to form a sort of “L” shape with your fingers.

Take the thumbtack and insert it into the earphone socket while holding your phone or tablet in the other hand. This should be done so that the point of the thumbtack hits the plastic part of the connector, then firmly pushed and twisted to secure it.

Burrowing into the plug with the bent point should be minor yet noticeable. Pull the broken headphone jack out of the hole when you’re satisfied you have sufficient purchase.

4. Toothpick and Hot Glue

Are you looking for another device that is small enough to fit into the socket and remove a broken headphone jack from your computer?

Try a toothpick; it doesn’t matter if it’s plastic or wooden. Simply ensure that it is narrow and long enough to reach into the socket and reach the broken earphone plug before proceeding. After that, apply a small amount of hot glue to the end of the stick and allow it to cool for a few seconds.

Carefully insert the earphone into the earphone socket until it comes into contact with the trash. Wait for the glue to cool and dry before removing it from the surface. If everything goes according to plan, the broken headphone jack that has been missing will be replaced!

5. Heated Paperclip

You don’t have any glue on hand? Because the broken component of the connector is nearly always accompanied by a ring of plastic, heat is a good alternative for the broken part of the connector. Take a paperclip and unwind it, bending the main length out by 90 degrees, in order to grasp hold of it.

Then, using something heatproof to hold the paperclip, heat the end of the bent piece until it is hot. The heated paper clip should be gently inserted into the socket straight down the middle while holding your phone in the other hand. Firmly press down on the plastic and allow it to cool for a few minutes. If everything has gone according to plan, you should be able to remove the damaged portion of the earphone connector within a short period of time.

6. Grip Stick Broken Headphone Jack Removal Tool

If your DIY remedies aren’t working, it may be time to investigate a professional-level remedy. Grip Stick is the outcome of a successful Kickstarter campaign, and it was created expressly for the chore of removing earphone plugs that had broken off throughout the campaign.
Despite the high cost, it is far less expensive than hiring an expert to replace the lost earphone connector. Similar to this, if your phone is still covered by its manufacturer’s warranty or smartphone insurance, it will be inconvenient to have it sent away for repairs. Purchasing a Grip Stick will eliminate this potential problem. The Grip Stick is easy to use and understand. Slide the cylinder into the earphone socket, push it into place, and then pull it out using the ring to remove it from the socket again. The Grip Stick will act as a stopper for the broken headphone jack.

It’s Time to Switch to Bluetooth Headphones

If, for some reason, you are unable to remove the broken earphone plug from your smartphone, do not become alarmed. It’s conceivable that the volume on your smartphone is still functional, so check it out. Play some audio to see if the device’s speaker is still operational; if it is, you can move on to the next step.

Is there no audio? This is due to the fact that the damaged plug is signaling to your device that it is plugged in. As far as your phone or tablet is concerned, it is transmitting audio to your earphones over Bluetooth technology. Until you can dislodge the offending object, you’ll be forced to endure a silent experience (which might be irritating when making phone calls). Even though it may be difficult and need you to reconsider your music choices, switching to Bluetooth is the most effective strategy to avoid having your earphone connectors broken in the future. While you might try one of the solutions listed above, purchasing Bluetooth earphones is the best choice. Do you require assistance? Check out our shopping guide for Bluetooth earphones.

Cheaper Earphones Are More Likely to Break

Personally, I’ve observed that earbuds that are less expensive are more likely to have badly constructed plugs. This carries a dual risk: not only might the plug break, but it could also cause harm to the socket. The same thing can happen with standard use if the connector is built at a low cost; the result is almost always annoyance and dissatisfaction.

Your headphone jack appears to be in good working order, but your iPhone is locked in headphone mode? Take a look at our troubleshooting guide, which is dedicated to this issue. In addition, if your phone has been damaged in any way, you should read about how to recover data from a phone with a cracked screen.

We hope you enjoy the products and topics we propose and discuss! Because MUO participates in affiliate and sponsored agreements, we receive a portion of the money generated by some of your transactions. This will have no effect on the amount you pay, but it will assist us in making the best product recommendations.


Leave a Reply

Your email address will not be published. Required fields are marked *